Rovertech 2.0

russ220

Wouldn't the L-series pulley be the same?

russ220

I finally found them mate.

Some are better than others but tbh you're probs best taking the lot

russ220

Well if someone does buy and break it I'd have the cruise control gubbins.

It might be worth posting it on the T16 owners and/or rovertech Facebook page if you haven't already

russ220

im sure ive got a box full of a few. im sure the surrounds are for a coupe as didnt fit my GTi
i'll see if i still have them

russ220

I'm sure I've got an OE top one that's not rusty

russ220

£50 posted, that's what I paid for it

russ220

I've got a lower water rail, I bought it for my 45 T16 conversion. It was no use to me as it was nothing like the one I set to replace, my engine came from a 620Ti so I am assuming this is for a 220turbo setup I'd advise looking at a pic or your current pipe :) https://preview.ibb.co/ii58ya/received...

russ220

PM'd ref the boost controller

russ220

i got the dog bone mounts mate (21 & 23) , theyve been sat around since 2007 - look in good condition too.

russ220

Beef does alloy cam covers mate aka oversport

russ220

russ220

Sorry for delay i totally forgot about this, just spotted the photo in my phone

I'm looking for £15 posted

russ220

I've got one but it's been painted blue for some reason. Quite well tho tbf

russ220

I will be, after last year's weather let down it'll be good to make it into the park this time

russ220

I have a spare AC housing too, seems to have a DIY AC delete pulley bolted to it too

russ220

About a year late but finally sold this lot

russ220

russ220

I'm after the above 'tickford' style airbox

Preferably with the intake snorkel but not necessary if you only have the airbox

[Click to zoom]

russ220

Kv6 starter also fits

russ220

Hi mate. Unfortunately the one has broken mounting points. Not the screw points but the tabs that slot under the headlight. I've got some pics now photobucket has finally decided to not reject the upload http://i121.photobucket.com/albums/o218/ROVER-DOSE/For%20Sale/misc%20items/DSC_0054_zps8shbqgdt....

russ220

I got this type going spare
:

As I have these fitted now:

russ220

Ive got some mate, in black. I converted my GTi to short indicator to suit it's new wings.

I'll need to dig them out and inspect the mounting points tho

russ220

russ220

>420i or diesel 45/zs rubber mount for cambelt side >620Ti lower cambelt mount (pokes thru cambelt cover) >420i upper cambelt mount (silver bit) (Rimmer's)* >420i / 45 / ZS upper dogbone ** >420i or diesel 45/zs gearbox mount >420i or diesel 45/zs lower dogbone >420i triangle plate for rear of sump ...

russ220

Merry Christmas to everyone

russ220

Isnt the resistance (ohms) different too - i.e for the different versions of MEMS

Im hoping so or's i ve changed from red to blue for nothing

russ220

i got a full set mate, i converted to wasted spark so swapped them out for blue bands

PM me

russ220

russ220

Ah right :) The 620 and 220 boxes do indeed have different shafts, X & U spec Im sure the very early 220/420 bubble diesel non-intercooled are fitted with a PG1 whereby they also have the narrower shafts as these are also non-Uspec variants. The 220/420/620 diesel intercooled and 25/zr/45/zs/sw ...

russ220

was the ZR td one i sent you no good?

russ220

Engine and all ancillaries now sold, just the CVT autobox, driveshafts, and starter motor remaining

I also have the exhaust centre section and rear silencer too (silencer is for a saloon)

russ220

zr front n zs rear shocks are direct fit. 25mm shorter damper rod too

russ220

cheers mate appreciate it

i dont suppose you got a link to the forum?

russ220

Bump - prices reduced

russ220

I have for sale the CVT gearbox from my Rover 45 (1.8) The CVT gearbox engages all gears both up n down smoothly, engages drive and reverse without any clunks or bangs, the sport mode works as it should as does Park, Neutral and manual gear selection modes. I'm after £50ono for the CVT gearbox -[/b]...

Rovertech 2.0

Search found 815 matches

Re: t series turbo or nasp crankshaft aux pulley

Re: Coupe Fog light kit

Re: Rover 420GSi Bubble R Reg with MOT For Sale £250

Re: Coupe Fog light kit

Re: Stainless Coolant Hoses. 220 turbo

Re: Stainless Coolant Hoses. 220 turbo

Re: Stainless Coolant Hoses. 220 turbo

Re: Rover coupe and turbo parts for sale

Re: Rover R8 220/420 2.0 T Series Engine Mounting's

Re: cam covers that arnt warped

Re: Aircon thermostat housing

Re: Aircon thermostat housing

Re: Aircon thermostat housing

Re: Pride of Longbridge 2017....

Re: 220 turbo waterpump housing and alternator

Re: BREAKING - Unfinished 1.6 Honda DOHC 160bhp engine bui

Re: CVT 'box£50 (from 1.8 kseries) - 40k miles

820 cylindrical airbox

Re: cheap t16 starter motor + 420 petrol or diesel driveshaf

Re: WANTED: Phase 1 Long Indicator Hockysticks

Re: WANTED: Phase 1 Long Indicator Hockysticks

Re: WANTED: Phase 1 Long Indicator Hockysticks

Re: rover 420 engine mounts needed

Re: rover 420 engine mounts needed

Re: Merry Christmas

Re: Red band Turbo injectors for T-Series

Re: Red band Turbo injectors for T-Series

Re: Wasted spark loom + ecu

Re: Wanted diesel 5th gear for a 220 turbo pg1 box.

Re: Wanted diesel 5th gear for a 220 turbo pg1 box.

Re: CVT 'box£50 (from 1.8 kseries) - 40k miles

Re: Parts wanted (220/t16etc)

Re: 1.8 k-series engine £100, CVT 'box£50 - both 40k miles

Re: 1.8 k-series engine (complete) and CVT 'box - both 40k m

CVT 'box£50 (from 1.8 kseries) - 40k miles _ SOLD