Rovertech 2.0

RikK

The plastic that holds the bolts in are breaking off of the rear number plate plinth on my coupe so I'm looking for a good one, ideally in tahiti blue, if anyone has one please let me know.. many thanks.

RikK

Hi Mitus, if you have any coolant hoses for 220 turbo, especially ones that connect to the heater matrix, i'd be interested. thanks.

RikK

I'm looking for the plastic panel which fits under the dash on the drivers side (has the cover for the fuse box in it), dark grey colour for 1993 coupe.. thankyou.

RikK

I’d really like to obtain a set of the original 15” alloys for the coupe turbo.. not going to fit them immediately but to keep for completeness as the cars are getting rare these days so it would be good to have the ability to put it back to the original look if I ever wanted to. If anyone has some ...

RikK

ok , thanks, i might go for that.. but am not in a rush so will see if anyone has one that doesn't need any work on it.

RikK

I'm looking for a clock strim trim (walnut) for the mk1 coupe dash.. as mine has been damaged when it was removed. Needs to be in as good condition as possible. Also interior trim panels for the doors and rear quarters.. the dark grey colour, again need to be in vgc. Not bothered about the vinyl ins...

RikK

Well if you do want it PM me an offer , I can sent it by recorded post and within a day or two of payment

RikK

Oh, I see!

RikK

Why?!

RikK

I can take paypal and post it by recorded post within a couple of days.

RikK

I think I could do better than that! .. could post within a day or two

RikK

I have one of these for sale - http://www.rimmerbros.co.uk/Item--i-QEP10123 I bought it as a spare before adding aircon to my car.. therefore it is no longer of any use to me as it is for the non-aircon model (200/400 with 2 litre t-series engine). This is brand new , never fitted and no longer avai...

RikK

I bought this as a spare some time ago but don't need it now as it's for the non-a/c model and I converted my coupe to have a/c a few years ago. Part number is QEP10123 - it's no longer available from rimmer bros - see http://www.rimmerbros.co.uk/Item--i-QEP10123 This site says it is available for £...

RikK

Actually.. panic over, maybe .. the mechanic reckons he's found a place where he can get a reconditioned driveshaft, so hopefully (if its the correct one) that will be ok.

RikK

Hello,
My offside driveshaft has broken in half where there is a rubber balancer.
Does anyone have one or know where i can get one ?
Is the driveshaft specific to this model or will one for any other models fit?

thanks
Richard

RikK

They had one at the south lake mini centre, 50 quid though!, but i ordered it anyway as no where else seems to have them and i reckon it will be better than a used one that is likely to be at least slightly worn. And worth it if it stops my door rattling every time i go over bumps! Thanks to the oth...

RikK

Thanks for the links. I will ask them.

RikK

Great. Thanks. Even if it's worn it would be useful to have a spare to work with, I was thinking perhaps i can take the pins out and replace them with new ones.

RikK

I’ve been trying to find some new hinges for my coupe drivers door as it’s gone wobbly; found the lower one at rimmer bros but the top one is no longer available.. anywhere. So the one I need is the drivers side coupe top hinge - http://www.rimmerbros.co.uk/Item--i-BDB38032 Ideally a new one though ...

RikK

I may be interested in these, if they are still available (i currently have koni yellows and they are a bit too firm for my liking really).

RikK

great - thanks.

RikK

That's useful to know. Thanks.

RikK

Wanted.. PCH109500PVA .. the top radiator hose for an air-con equipped 220 turbo coupe(the one with the thermostat built in to it).

Also the pipe that goes to the waterpump too.

thanks
Richard

RikK

Bought a set of addendum wheels, in good condition as described, arrived quickly and with good communication, thanks again.

RikK

I managed to slightly crack the edge of the walnut wood dash strip (that the clock fits in) on my coupe when changing the clock bulb. Not that it’s that noticeable but being a perfectionist I’d like to replace it so if if anyone has a good one (without scratches or cracks) please let me know. Thanks...

RikK

If these will fit the 220 coupe then I will take both. thanks

RikK

The top plastic part of my dipstick has cracked, so i need a replacement. Does anyone have a good used one please? (I got a new one from rimmer bros, LQM100600, however it is 1cm longer and the marks are also almost 1cm different, and it wouldn't go right in the tube anyway - 6" or so sticking ...

RikK

I'm looking for a spare "Elbow - Engine coolant outlet" (part 16 on this page http://www.rimmerbros.co.uk/Item--i-GRID002427) for a 220 turbo with aircon. (need to replace my coolant temperature sensor but the old one is so tight i'm worried removing it could damage the housing it fits int...

RikK

I have a Rover 25 Aircon Evaporator which i have no use for, if anyone has a use for it please let me know .. if not it will soon be going in the bin sadly (as there is nothing wrong with it, but it is taking up space!)
thanks.

RikK

ok.. will do as soon as i get time. thanks.

RikK

Does anyone have the black plastic corner inserts for the coupe bumpers? - need to be in good condition, though probably can't expect to find a perfect set.

thanks.

RikK

Hi, I need the trim bit for the roof of a coupe, there are two , one each side behind the glass panels - i need the offside one. It's a thin black strip about an inch wide and a foot or so long.
thanks.

RikK

Thanks for that; useful to hear from someone who has experienced both. As you say it seems like i'll have to test drive it, and on some bumpy country roads not just on a smooth main road!

RikK

I read something like that elsewhere, a bmw or something had tried to get ahead of a R75 and failed badly, got a bit upset and started flashing his lights behind the rover, the rover guy just pressed the button to raise the rear window blind in the rover..

RikK

nice - looks like it costs lots more than £690!

Rovertech 2.0

Search found 132 matches

Rover coupe rear number plate plinth

Re: Garage clear out 220 turbo bits - job lot

220 Coupe dash panel

Rover coupe turbo original 15” alloys

Re: 220 Coupe - clock strip and interior door trim panels

220 Coupe - clock strip and interior door trim panels

Re: Pipe assembly pump/union & return - QEP10123

Re: Pipe assembly pump/union & return - QEP10123

Re: Pipe assembly pump/union & return - QEP10123

Re: Pipe assembly pump/union & return - QEP10123

Re: Pipe assembly pump/union & return - QEP10123

Pipe assembly pump/union & return - QEP10123

Power steering pipe assembly pump/return 200/400- QEP10123

Re: Rover 220 turbo coupe offside driveshaft

Rover 220 turbo coupe offside driveshaft

Re: Rover Coupe door hinge

Re: Rover Coupe door hinge

Re: Rover Coupe door hinge

Rover Coupe door hinge

Re: R8 Koni Red Shock Absorbers (refurb required)

Re: Top radiator hose for a 220 turbo coupe with aircon

Re: Top radiator hose for a 220 turbo coupe with aircon

Top radiator hose for a 220 turbo coupe with aircon

Re: goldie - My Feedback Thread

Coupe walnut dash strip

Re: front abs sensors rover xw coupe

220 coupe turbo dipstick

Coupe 220 turbo with aircon .. coolant sensor housing

Rover 25 Aircon Evaporator

Re: Coupe bumper corner trims/rubstrips

Coupe bumper corner trims/rubstrips

220 coupe roof trim

Re: Rover 75 or MG ZT

Re: Rover 75 or MG ZT

Re: Rover 75 or MG ZT