Rovertech 2.0

ben342

Bump. Anyone got anything they'd be willing to part with?

ben342

Bit of a long shot but anyone got a 4 branch manifold with T3 turbo fitting and a 2 bolt flange for external waist gate?

Thanks
Ben

ben342

No, it's been fabricated to fit a 600/800 lever. Your right, if the arm was perfectly strength it would be a perfect fit. It'll not be easy straightend out I don't think. No harm in giving it a go as it'll be better than cutting and welding. Might have to take it to work and use heat.

ben342

Only a couple rubbish ones I took last night with a tourch as the lighting in my workshop is rubbish.

ben342

No, last owner did. But they kept the engine, box etc so didn't get the lever to go with the rest of the bits I have here for the conversion.

ben342

It is a thought but bracket would need a lot of modifying to suet my mount on that side of the gearbox. Think it will be Easter to just shorten the MGF arm that I have by about an inch to bring it into line with the slave cylinder I have just now. Think that option would be the least amount of work ...

ben342

Spacer\washer under the slave? Drew No can do im afraid. It's on a maestro that has been converted to this style clutch and the slave is sitting as far out as it able to already. There is an engine mound in the way stopping it going further. Worst come to worst I might have to cut up this new arm I...

ben342

Release lever fitted tonight as as mitue has said, MGF lever won't do as it steps out too far. Back to original request. Anybody got a lever for 620/820?

Thanks
Ben

ben342

Mitus wrote:Might be too late, but I think they're different. MGF one has a longer shaft and the arm is further from the gearbox casing IIRC.

Ah, well I've hit the MGF Arm now so I'll see how it fits possibility tonight.

ben342

Drew wrote:Is it the same as an mgf? Lots of release arms on eBay.

Drew

Typical, that must have been then only rover I didn't look it up for! Even looked at freelancer! Just looked it up and yes, it looks right so I'll get one of them ordered up.

Thank you very much for that
Ben

ben342

I am desperately in need of a clutch release lever from I believe a 620 or 820 for hydronic clutch. It should have a hole in the end of it for a pin to go through for securing slave cylinder to.

Thanks, hope someone can help.

Ben

ben342

Ok cool. I'm needing one. I'm also needing other exhaust parts off your website. Shall I just send you a PayPal payment for the manifold flange than get the other bits I need seperoutly off your website?

ben342

Grant, do you still have one of these? I've just looked on you website but could only see the turbo flanges, not manifold flange. What grade of stainless is it?

ben342

Thank you very much for the replies everybody. It have to admit I didn't even think of X-Part...
Hopefully between BlueRover and the X-Part link pateT16 put up I should be sorted so thank you very much again.

Ben

ben342

Anyone?

ben342

I am still looking for a pair of these. Nylon ones will do or even just the measurements of one so I can get some made. I have tried rimmer bros but they have non in stock just now.

Thanks
Ben

ben342

Sorry, it's for a T16. I forgot to say that in the original post.

I have sent you a PM, edward22.

Thank
Ben

ben342

Hi. I'm in need of the dowels that locate the head to the block for a T16 as mine are broken. If possible I would prefer steel ones rather than the original nylon ones but if it isn't possible to get them I will take the nylon ones.

Thanks
Ben

ben342

Bought a head and inlet manifold off sam and they were just as he described. He was very helpful supplying me with photos before making the deal then he got it all prepared for me so I could get it collected by courier.

Thanks again
Ben

ben342

You have pm.

ben342

Bought a T16 head off him. Arrived very quickly and great to deal with.

Thanks again
Ben

ben342

Hi. How much would you take for just the camshafts and cam position sensor?

Thanks
Ben

ben342

I have just Pm'd you about head.

ben342

Everything arrived in the end. Thank you.

Ben

ben342

Sold him a radiator and sent it to Portugal for him. Paid straight away and very good communication.

Thanks again
Ban

ben342

Buying experience so far... Paid £50 for a sump and cam covers on September 22nd. Sent him a message on October 1st asking why it hasn't turned up and was told he was away and would not be back till 16th. Messaged again on October 31st and he replied saying he had forgot and would get straight on i...

ben342

Top man. Posted the sump I bought off him straight away and arrived very quickly.

ben342

I'll take it.

ben342

dave_6785 wrote:How much for the 282mm brake set up inc postage to BB71BY?

Cheers again, Dave

It would be £40 posted but that is without the disks as I found one was warped. Part number for new disks is BG3970.

Send me a pm if your interested.

ben342

Roll have to check the turbo for play. Engine is wasted spark so whatever flywheel goes along with that but I'll check myself if it is 2 or 4 gap. Flywheel may also be available as I'm thinking of going for an alloy flywheel on mine. Radiator is possibly sold but you can be 4th in line if the others...

ben342

I'll also have the standard Pistons and rods available is someone wanted them.

ben342

Glad to hear you got the bits ok. Nothing really left of the T16 conversion as it is currently getting fully rebuilt to go into my track car. Only things I could let go is the standard ecu, cheep bled valve, standard turbo with blank for dump valve and the standard exhaust manifold. Intercooler is g...

ben342

Prices amended. What isn't gone by this time next week will go for scrap with the car.

ben342

Bought a turbo from billy. Very well packaged and posted very quickly. Top man. Thank you very much.

Ben

ben342

Come up with a price for the brake kit posted if that's ok and I'll send you some money . Do you know what size master cylinder you have? Want the kit to go on a zr105 and apparently they have a smaller master cylinder It is standard rover 25 one. I have found the disks junk so I wont send them wit...

Rovertech 2.0

Search found 50 matches

Re: 4 branch manifold

4 branch manifold

Re: 620/820 clutch release lever

Re: 620/820 clutch release lever

Re: 620/820 clutch release lever

Re: 620/820 clutch release lever

Re: 620/820 clutch release lever

Re: 620/820 clutch release lever

Re: 620/820 clutch release lever

Re: 620/820 clutch release lever

620/820 clutch release lever

Re: T16 exhaust manifold flange

Re: T16 exhaust manifold flange

Re: T16 Head/block dowels

Re: T16 Head/block dowels

Re: T16 Head/block dowels

Re: Head/block dowels

T16 Head/block dowels

Re: samsexpress - Feedback Thread

Re: Top end t16 parts

Re: WonderSheep - Feedback Thread

Re: David's sale thread, Turbo parts and MK2 ZR Breaking

Re: Freshly Built T16 Turbo Wasted Spark Cylinder Head

Re: dommiboi - feedback thread

Re: Red_Coupe - Feedback Thread

Re: dommiboi - feedback thread

Re: WonderSheep - Feedback Thread

Re: Rover 620 Ti Sump

Re: T16 Rover 25 braking

Re: T16 Rover 25 braking

Re: T16 Rover 25 braking

Re: T16 Rover 25 braking

Re: T16 Rover 25 braking

Re: _BILLY_ZR_ - Feedback Thread

Re: T16 Rover 25 braking