Coupe/R8/R3 parts for sale

[stefaclese]

Koni shocks front and rear with unknown springs fitted, rears were possibly Spax and were shot blasted and powder coated, fronts are unknown and for a K series ZR iirc. The shocks had about 2000 miles use on them when I bought them and probably had another 10k put on them when they were on my old Coupe. Most of the bodies on the rears were ground back to bare metal, primed, sprayed several times with Tetraschutz stonechip and sprayed black, the bodies for the fronts were treated the same way (I left the inserts alone though as these had no corrosion or damage to the paint) - £160

Front poly bushes - lower arm bushes (Superflex, red) fitted to some arms that were new at the time (painted black, about 10k use), can come with or without the hubs which are presently attached (in decent condition) - £40

Anti-roll bar poly bushes for a 25mm roll bar (Superflex, red) - £10

Poly bushed ARB droplinks (Superflex, red) - £20

Scorpion stainless cat-back exhaust (though it comes with a gutted cat) - the bend section has been replaced with a high quality part made out of a decent thickness stainless tube and oversized to compensate for the compression bends. This is for a VVC but could be fitted to a 220 NASP I believe (same 3 bolt flange for the cat) or adapted for a 1.6 K series - £90

PI boot spoiler with integrated third brake light - this is brand new unpainted, made out of a resin that won't flake like the standard spoilers - £90

Plasma dials from Visual Performance for a later 216 Coupe with 130mph clocks (will also fit mk3 200's and 25's/ZR's) including matching heater dials - £30

Chrome dial rings for a mk2 Coupe/mk3 200/25/ZR - £15

Coupe doors in Tahiti blue - £10 each

Coupe windows and mechs - £20 each

Coupe rear bumper in Tahiti blue - £15

All parts are located in South Oxfordshire. I'll try and take some photos when I manage to dig stuff out of the garage.

[stefaclese]

Also forgot to add:

Camber adjustable spherical bearing front top mounts with bearings - these are from Dans (Cableguy) second group buy. One bearing has been fitted, the other will need pressing in as my vice couldn't get it all the way in (was a slightly tighter fit than the other one) - £135

[1234dist]

you have pm on rcoc

[Badboyrich]

Yes please to all the poly bushed stuff if I haven't been beaten to it.

[stefaclese]

Just the lower arms left, Craig has bought the ARB bushes and droplinks.

Also forgot to add:

Full light grey leather drivers seat, worn but no tears to the bolster - £20



Light grey leather front door card inserts in good condition - £20 for the pair

I also have 2 centre armrest consoles with light grey leather lids including the matching handbrake cable brackets which these attach to at the rear - £25 each

Roof bag with panels (handles and hinges sealed with silicon - leak free) - £20

[stefaclese]

Bump!

[stefaclese]

Bumpski!