David's sale thread, Turbo parts and MK2 ZR Breaking

[D@VID]

Located in Middlesbrough

I've been away from the Turbo seen for a while, prices based on similar parts

All prices are collected, I can post at buyers cost

Turbo Bottom end £50
Turbo Head £50
Ti Alloy Sump £50
Turbo Plennun £20
NASP Box £40
620Ti rad and intercooler, has been repaired at the top unsure if useable £10
front GMAX struts £40
262 vented brake setup £30
4 Straights (no tyres) £25 Each
Side skirts £25 Each
Rear bumper with removable bib £40
Front bumper with removable grille and bib inc fogs £50
220 Engine loom paired with ZR loom (just needs 4 wires wiring to little ECU pluc which is part of car) £40
2 Gap Dizzy ECU with paired 5AS and 1 Fob (can't remember the model and sticker is not readable) £40

[dave_6785]

Thread updated, question no longer applies

[benh2012]

Any pics of the car?. Cheers.

[D@VID]

Bump, thread updated

[WonderSheep]

Price for T25 Turbo?

[dave_6785]

Whats included in the 262mm set up?

Cheers, Dave.

[D@VID]

calipers and carriers, the discs and pads weren't usable

The ECU with the linked 5AS and fob is not a 550 but another 2GAP Dizzy 200BHP ECU, will get the model number when I can (it's not at my house)

[parker2245]

You have pm

[D@VID]

bump

[tomcat]

550 ecu to me

awaiting payment details
Scott

[jader]

T25 still available?

[D@VID]

@tomcat will sort this out tomorrow (saturday)

@jader yes

[jader]

how much miles?
play in the shaft?
I need a turbine in good condition

[pengy_666]

Is shell/car being broken?

Is it still there?

[D@VID]

Do not know mileage of turbo, but from previous experience know it has little play (no oil) turns freely and looks in good condition. Like shall remove from manifold make sure no cracks are present but engine came from a running car

The mk2 shell is currently complete, the engine is what forces the breaking as the 1.4 is tired after it's hgf, it's been repaired but is noisy when cold

[pengy_666]

I need a couple of trim parts of you're gonna break shell.

Nothing of value I'm afraid but massively helpful to me

[WonderSheep]

Mk2 front ends make good money on eBay. Look at sold prices and you'll see what I mean.

[pengy_666]

They've come down, at one point thy were at stupid prices!

I watched people's listings for months on end, they weren't selling and people kept adding at similar prices then eventually people realised they just worth what they were listing them at.

The guy I bought my shell off listed front ends (bumpers and lights) for nearly £500!!

He soon disappeared, he was selling shells for £150! Minus interior, looms, bumpers and lights hahah

[D@VID]

I offered the full front end to a guy on fb for £350

He wants bumper wings bonnet lights fogs and slam panel

What parts do you need pengy?

[D@VID]

Bump

[D@VID]

Bump Thread Updated

[pengy_666]

I need the caps that hold the side skirts on.

Told you it wasn't much.

[D@VID]

Still got loads of parts the car is still almost complete but taking up room in my garage

[dave_6785]

The ECU with the linked 5AS and fob is not a 550 but another 2GAP Dizzy 200BHP ECU, will get the model number when I can (it's not at my house)

Does anyone know if this will work with a NASP Coupe that is having the engine converted to turbo?

[D@VID]

Yes it will

[D@VID]

Final bump before eBay, am off this week so can sort straight away, accepting offers on all inc car whole

[harkins77]

What's your best on the bottom end? Am thinking of using it for my Ti after a little bit of work on it. I'm in Thornaby so only 2 miles away roughly

[ben342]

Hi. How much would you take for just the camshafts and cam position sensor?

Thanks
Ben

[tony-f]

have you still got the loom?

[ClaudioB]

Do you still have the sump? do you have the rear mount too?

send me a pm if yes please.

Cheers